Tony_C Posted April 23, 2020 Report Share Posted April 23, 2020 Day ‘X’ of lockdown.... Something that has never concerned or particularly interested me in my previous 40+ years of ownership.... My rear wheel arch on drivers side clearly has a seam, passenger side does not, is this how they were built, do they all have the same? If so, why? For further info; Post 60k one of very last 3A’s off the line (last 5 or so) 99% sure not related to rust or corrosion repair and nobody ever bashed this particular corner as far as I am aware.... (I was Taking a picture to share of the ‘dots’ on tonneau cover) Quote Link to post Share on other sites
stuart Posted April 23, 2020 Report Share Posted April 23, 2020 Not original but a typical repair nonetheless. Stuart. Quote Link to post Share on other sites
John McCormack Posted April 24, 2020 Report Share Posted April 24, 2020 Can confirm not original. But a neat repair. Quote Link to post Share on other sites
Tony_C Posted April 24, 2020 Author Report Share Posted April 24, 2020 Yes thanks Gents... I think I know the culprit but ‘an honourable scar for a (still wannabe) Rally Car....... was never going to be entering concours anyway Quote Link to post Share on other sites
Graham Harris Posted April 24, 2020 Report Share Posted April 24, 2020 Also your power cable should come out under the fuel tank cover and then under the carpet, there should be tags welded to the boot floor to clip the cable down. Graham Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.