Grahamgl Posted November 3, 2019 Report Share Posted November 3, 2019 Gentlemen, I am in the process of restoring the metal dashboard for my 4. The two sponge rubber seals for the duct to dashboard are, unsurprisingly, crumbling. They are not available new from the usual suppliers. I would think that a modern sponge rubber extrusion could be used but my searches have not revealed any suitable profiles. What have other members used for this purpose? Thanks Graham Quote Link to post Share on other sites
RogerH Posted November 3, 2019 Report Share Posted November 3, 2019 Hi Graham, there two seals each with a fairly simple profile. How about getting some fairly dense sponge and cutting your own. Roger Quote Link to post Share on other sites
John L Posted November 3, 2019 Report Share Posted November 3, 2019 Window draft excluder can be had in varying thickness and colours, and is usually self adhesive on one side. Not sure how thick it has to be though. John Quote Link to post Share on other sites
MKTR Posted November 4, 2019 Report Share Posted November 4, 2019 Trim a piece off a friend/relative's yoga mat - they will never know! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.