Will Posted June 24, 2018 Report Share Posted June 24, 2018 Just installed replacement lenses from Rimmer. The top edge of each lense appears to be warped so will not effectively seal against the housing. Anyone else experienced this? Quote Link to post Share on other sites
len1 Posted June 25, 2018 Report Share Posted June 25, 2018 Even originals have a shape to them as where they fit on the front panel it has a shape too. Len Quote Link to post Share on other sites
AarhusTr6 Posted June 25, 2018 Report Share Posted June 25, 2018 So are you saying we have to use silicon? Rich Quote Link to post Share on other sites
len1 Posted June 25, 2018 Report Share Posted June 25, 2018 no...mine fitted fine. Len Quote Link to post Share on other sites
Alfrom Posted June 25, 2018 Report Share Posted June 25, 2018 I bought a pair from Moss a few weeks ago. The NS fitted perfectly but the OS didn't. While the fixing holes were in the right places, the overall width of the OS part was about 3mm too short at the outer extremity. Fettling the plastic and the seal plus a little sealant solved the problem. Quote Link to post Share on other sites
Will Posted June 25, 2018 Author Report Share Posted June 25, 2018 Thought I might add a pic. The widest part of the top joint does not compress the foam. Seem to be posting upside down for some reason. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.