classic225 Posted April 1, 2017 Report Share Posted April 1, 2017 Hi guys, Build my wiring loom and now the time has come to hook everything up. The socket that holds the signal unit [ indicator) has lost its wires, so I have no idea what goes where. I know from the wiring diagram were the 3 wires should go, but as there are no wires I could do with some help. The socket has 3 connectors for the signal light unit, one is horizontal and two are vertical......(depends how you hold it...) so I'm trying to find out were the horizontal and two vertical connectors go to. Thanks, Yves Quote Link to post Share on other sites
barkerwilliams Posted April 1, 2017 Report Share Posted April 1, 2017 Quote Link to post Share on other sites
RogerH Posted April 1, 2017 Report Share Posted April 1, 2017 Hi Yves, have a look here for the wiring diagram.http://www.advanceautowire.com/tr24a.pdf Has your socket got any identification marks on it for the wires - B, P, L etc Roger Quote Link to post Share on other sites
classic225 Posted April 1, 2017 Author Report Share Posted April 1, 2017 Thanks for the reply, and no markings on the socket..... Yves Quote Link to post Share on other sites
foster461 Posted April 1, 2017 Report Share Posted April 1, 2017 If the flasher unit is oriented such that the center horizontal pin is away from you and the two vertical pins are closer to you then the light green wire goes on the center pin, the dark green wire on the left vertical pin and the green/brown wire on the right vertical pin. Quote Link to post Share on other sites
classic225 Posted April 1, 2017 Author Report Share Posted April 1, 2017 Super! Thanks! Yves Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.