YOW500 Posted November 4, 2016 Report Share Posted November 4, 2016 I need to replace the front splined wheel studs on a TR4. Both sides are 7/16. However the stud spline dia on one side is 13.10mm, but on the other side it is 14.30mm. I have not been unable to find a 7/16 x 14.30mm splined stud. The spline dia of 14.30mm starts with the next size up which is 12.00mm. Has anyone had such an issue before, and does anyone know of a supplier for a 7/16 stud with a spline dia of 14.30mm ? Thank you all, Russell Quote Link to post Share on other sites
RogerH Posted November 4, 2016 Report Share Posted November 4, 2016 Hi Russell, those splines are not very uniform. If you are replacing have you tried Moss (and others) http://www.moss-europe.co.uk/shop-by-model/triumph/tr2-4a/steering-suspension/front-suspension/front-suspension-tr2-3a-tr4.html Part #71 These should fit unless you are seriously non-standard Riger Quote Link to post Share on other sites
YOW500 Posted November 4, 2016 Author Report Share Posted November 4, 2016 Hi Roger. Thank you. Yes, I purchased eight studs to do the job from Moss. Moss sell the stud with the 13.10mm spline dia as you would expect. Its the other side with the larger splined hole I will have the issue with. I find it hard to understand that they are not available somewhere. I dont really want to fork out for another hub just yet. Russell Quote Link to post Share on other sites
stuart Posted November 5, 2016 Report Share Posted November 5, 2016 Hi Roger. Thank you. Yes, I purchased eight studs to do the job from Moss. Moss sell the stud with the 13.10mm spline dia as you would expect. Its the other side with the larger splined hole I will have the issue with. I find it hard to understand that they are not available somewhere. I dont really want to fork out for another hub just yet. Russell That sounds as if someone has butchered the hub previously, I would be inclined to find another hub. Stuart. Quote Link to post Share on other sites
Bob Smith Posted November 5, 2016 Report Share Posted November 5, 2016 Russell, Sent you a P.M. Quote Link to post Share on other sites
YOW500 Posted November 6, 2016 Author Report Share Posted November 6, 2016 Hi Bob. PM sent. Russell Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.