Chilliman Posted October 21, 2014 Report Share Posted October 21, 2014 Any of you good folks got a spare flywheel kicking around for a TR4? I need to know the exact size (diameter) of the internal hole for a little experiment I’m planning.(could be the same for the 2/3/5/6 for all I know!) Many thanks John Quote Link to post Share on other sites
Fireman049 Posted October 21, 2014 Report Share Posted October 21, 2014 Hi John ~ Mine measures 23mm. Cheers ~ Tom. Quote Link to post Share on other sites
AlanT Posted October 22, 2014 Report Share Posted October 22, 2014 Would it help if I put a mike on the input shaft spigot on the gbox. Quote Link to post Share on other sites
stuart Posted October 22, 2014 Report Share Posted October 22, 2014 (edited) Would it help if I put a mike on the input shaft spigot on the gbox. No as there is clearance. Stuart. Edited October 22, 2014 by stuart Quote Link to post Share on other sites
Chilliman Posted October 22, 2014 Author Report Share Posted October 22, 2014 Thanks folks - I'm going to work with Toms measurement above - I've got some tolerance for what I want to achieve. cheers John Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.