ray dore Posted May 13, 2014 Report Share Posted May 13, 2014 Has any one fitted a tail/brake light in there surrey top, if so, what light did you use,was it one you stuck on. thanks ray Quote Link to post Share on other sites
Geko Posted May 13, 2014 Report Share Posted May 13, 2014 (edited) As below - the stick-on is the cheapest option though you would need to find the right sealant (3M foam). Available in any car shop. There are more discrete options like fitting a long thin LED bar just above or below the backlight glass rubber seal or more elaborated if you have seats with headrests: brake LED lamps integrated in the headrests... Edited May 15, 2014 by Geko Quote Link to post Share on other sites
keith1948 Posted May 15, 2014 Report Share Posted May 15, 2014 I fitted a stick on LED bar just below the top rubber of the surrey back window several years ago. If the stick on pads need replacing simply get those that are for interior mirrors. I wired it into brake light circuit in the boot and earthed to car body in boot. It certainly seemed to help in France where the sun is much brighter than here and the standard brake lights don't show up very well. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.