pfenlon Posted March 17, 2014 Report Share Posted March 17, 2014 Getting nearer with the old girl now, my gearbox has the drive for the speedo on the left side (No O/D)? not sure thats normal. Need routing for speedo, this was LHD originally, couple of pics....... Quote Link to post Share on other sites
RAHTR4 Posted March 17, 2014 Report Share Posted March 17, 2014 Hi Peter, The speedo cable goes through a new hole under the bonnet support bracket. You are also missing the four captive nuts for the accelerator pedal. I cannot see from the photos, but you will need a hole just to the right of the master cylinder box for the rev counter cable. I will e-mail you a couple of PDF's that I made when I converted my TR4 to RHD. Regards, Richard Quote Link to post Share on other sites
TR 2100 Posted March 18, 2014 Report Share Posted March 18, 2014 Pete, Glad to see your good progress. FWIW the routing of the loom on early-ish TR4s is different. Part of the loom runs down the inner wing to the horns and headlight. I think I have sent photos to you already of this, detailing the holes and plastic clips but not sure of the routing you have used from the photo. AlanR Quote Link to post Share on other sites
pfenlon Posted March 18, 2014 Author Report Share Posted March 18, 2014 Hi Peter, The speedo cable goes through a new hole under the bonnet support bracket. You are also missing the four captive nuts for the accelerator pedal. I cannot see from the photos, but you will need a hole just to the right of the master cylinder box for the rev counter cable. I will e-mail you a couple of PDF's that I made when I converted my TR4 to RHD. Regards, Richard Magic drawings Richard, thanks very much. Quote Link to post Share on other sites
pfenlon Posted March 18, 2014 Author Report Share Posted March 18, 2014 Pete, Glad to see your good progress. FWIW the routing of the loom on early-ish TR4s is different. Part of the loom runs down the inner wing to the horns and headlight. I think I have sent photos to you already of this, detailing the holes and plastic clips but not sure of the routing you have used from the photo. AlanR Hello Alan, I had a standard loom and had to work with that loom, I had none of the plastic clips that had survived in one piece, so am routing it as normal. I was going to keep it as standard as possible but didn't manage to sell the starter or 4 branch manifold at Stoneleigh so on they went. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.