brian-nz Posted May 25, 2013 Report Share Posted May 25, 2013 Hi Can anyone advise what the correct line is for the brake pipe that goes from the T on the right hand side across the diff to the left. The diff has a clamp type thing on the cover. Does the pipe rest in that. Currently the hand brake cable is sitting there but a recent photo tells me this is not correct. Your thoughts welcomed. Brian Quote Link to post Share on other sites
foster461 Posted May 25, 2013 Report Share Posted May 25, 2013 Brian, I cant say that this is 100 correct/perfect but this picture approximates how that brake line routes. It does clip to the diff housing (my clip had rusted away so I welded a new tab for this purpose) then passes along the front of the axle before going over the axle and into the brake cylinder. There are folks here that have done a nicer job and I bet you will get some more pictures shortly. Stan Quote Link to post Share on other sites
Ashley James Posted May 25, 2013 Report Share Posted May 25, 2013 I asked the same question when I did mine and lots of people posted pics including Menno, so search of you want more detail. Good club this, you get lots of help. Quote Link to post Share on other sites
Graham Harris Posted May 25, 2013 Report Share Posted May 25, 2013 Try this Quote Link to post Share on other sites
brian-nz Posted May 25, 2013 Author Report Share Posted May 25, 2013 Thanks guys. Just what I was looking for. The amount of knowledge on this forum is amazing. Brian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.