stuart Posted February 2, 2014 Report Share Posted February 2, 2014 Forget the extra oil feed to the rockers. Waste of time unless done properly. Stuart. Quote Link to post Share on other sites
ijonsson Posted February 2, 2014 Report Share Posted February 2, 2014 (edited) Forget the extra oil feed to the rockers. Waste of time unless done properly. Stuart. I followed an advice on the Swedish TR forum, to plug the outlet of the extra feed connection and drill a 1 mm hole in the plug and thus restrict the oil flow so other bearings won't suffer low flow, if that is what properly means? /Inge Edited February 2, 2014 by ijonsson Quote Link to post Share on other sites
stuart Posted February 3, 2014 Report Share Posted February 3, 2014 Better but if the top end is in good order then its not really needed. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.