Jump to content

Recommended Posts

Looking for advice on re fitting the tub to my 3a.

The car has a one piece steering box

What i want to know is it possible to fit the tub without removing the box

 

Cheers

 

Mike

Link to post
Share on other sites

I would avoid this like the plague. Yes possible, but why would you take the risk.

Two bolts through chassis. Steering box to chassis.

One nut on steerng arm to the steering box. You may have remove the brace between spring pillers but unlikely. You need a ball joint splitter

 

This against the potential to damage the bulkhead and/or bend the column tube and column, damage the paintwork. Generally you cause yourself a lot of grief you probably do not need.

 

Removal gives the opportunity to give a nice paintcoat.

 

Rgds

Rod

Link to post
Share on other sites

Mike, why ask, you are not the kind of guy who cut corners ^_^

 

Chris.

 

Chris

That was the reason i failed my 2nd driving test many years ago.

The 1st Test ? 5 min late . Tottenham 1970 swines !!!

 

Mike

Edited by MikeTR-6
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.