Mark1965TR4aBRG Posted March 21, 2011 Report Share Posted March 21, 2011 I have now fitted a new Copper fuel line along the nearside chassis rail, but need some cliips to attach it somehow to the chassis. Not wanting to drill the chassis, does anyone know of a suitable non destructive fuel clip? Thanks.. Quote Link to post Share on other sites
Bob Smith Posted March 21, 2011 Report Share Posted March 21, 2011 The original factory solution was to fit metal clips 59191 and there were holes pre drilled in the chassis to accomodate them. With copper pipe it makes more sense to use plastic push in clips into the same hole positions. The positions and the clips are shown in the Moss catalogue. Quote Link to post Share on other sites
harrytr5 Posted March 21, 2011 Report Share Posted March 21, 2011 I made up a jig which enabled me to form strips of stainless steel to the correct shape for the flow and return, plus brake pipes on my TR5 Regards Harry. Quote Link to post Share on other sites
Mark1965TR4aBRG Posted March 21, 2011 Author Report Share Posted March 21, 2011 (edited) Thanks - I'll have a look for the pre-drilled holes and see if I can find the Moss catalogue.. Edited March 21, 2011 by Mark1965TR4aBRG Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.