BlueTR3A-5EKT Posted January 18, 2011 Report Share Posted January 18, 2011 Hi, I am asking this on behalf of a friend with a wrecked Peerless in his garden. The front end was easy as its TR - engine too. He is now in the throws of rebuilding the rear axle and driveshafts off this thing, can anyone help with torque settings and routes to spares? Bits like oil seals and bearings. As you can see this is not my area of knowledge..... Cheers Peter W Quote Link to post Share on other sites
Alec Pringle Posted January 18, 2011 Report Share Posted January 18, 2011 Hi Pete, Nigel Cluley is one good source, and Ian McDonald (as in Celia and Ian) another . . . . you can find Nigel as P&W registrar, and Ian is at http://www.imadeuk.co.uk/ Cheers, Alec Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 19, 2011 Author Report Share Posted January 19, 2011 Hi Pete, Nigel Cluley is one good source, and Ian McDonald (as in Celia and Ian) another . . . . you can find Nigel as P&W registrar, and Ian is at http://www.imadeuk.co.uk/ Cheers, Alec Thank you Alec I will get on to it. Peter W Quote Link to post Share on other sites
Nigel C Posted January 24, 2011 Report Share Posted January 24, 2011 Thanks Alec Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.