david ferry Posted December 10, 2010 Report Share Posted December 10, 2010 Hopefully a quick question..... Am I correct in assuming that a TR4 radiator (no filler neck) is the same size as a TR2 or 3 radiator in respect of core size and mounting lugs? Thanks Regards David Quote Link to post Share on other sites
stuart Posted December 10, 2010 Report Share Posted December 10, 2010 Mountings yes, core size no. TR4 is higher AFIK. Stuart. Quote Link to post Share on other sites
Menno van Rij Posted December 10, 2010 Report Share Posted December 10, 2010 I' ll measure my 3A rad tomorrow. It' s out anyway... Menno Quote Link to post Share on other sites
Guest ntc Posted December 10, 2010 Report Share Posted December 10, 2010 Hopefully a quick question..... Am I correct in assuming that a TR4 radiator (no filler neck) is the same size as a TR2 or 3 radiator in respect of core size and mounting lugs? Thanks Regards David Hi David I think you'll find the crucial measurement is the distance between the mounting brackets and the top hose outlet on the rad. The TR4 should be approx 21 inches whereas the TR3 should be 19.5 inches. Quote Link to post Share on other sites
Don Elliott Posted December 10, 2010 Report Share Posted December 10, 2010 I can't say for sure, but I don't think the hole through the radiator is (or was) ever needed in any TR4 or TR4A for the hand crank. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.