Jump to content

results on head, valve etc


Recommended Posts

hi my elderly friends,

 

thank you for the advise and help.

 

I replaced the minimum I could get away with 1 valve, head gasket set,

i also bought a spin of filter for the old girl and i must agree with bob (Lebro)very impressed with it

 

 

I reground all the valves, replacing only the badly damaged exhaust valve no3,

took me all day to regrind the new valve and that was using a grinding tool of e bay, very impressed with it,

 

I put the gasket Down using stag seal worked well

 

compression is now 185. to 190

 

and the car is working well no smoke and an improvement in the performance

 

should get another summer out of her, before a major refit

 

using a low port head at the moment tr2

 

when i do the refit I am looking to buy a high port head, 40 webber carbs and a manifold

light flywheel, parts to build a fast road if anybody has got any of these parts please contact me,

 

cheers pink

post-3990-0-65882300-1487003478_thumb.jpg

post-3990-0-90239600-1487003525_thumb.jpg

Edited by pinky
Link to post
Share on other sites

This ought to do you nicely Pink - bargain if still available . . . . .

 

http://www.tr-register.co.uk/forums/index.php?/topic/60922-sah-gas-flowed-high-port-head-available/

 

Might be able to place a low port head for you too . . . .

 

Cheers

 

Alec

w

 

thanks Alec,

 

can't seem to sent e mail, your right just what I am looking for

are you able to make contact with him

 

hope your are feeling better,

 

pink

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.