Jump to content

TR4 HS6 carb set-up


Recommended Posts

Thanks Mike, you are right of course, but I really doubt my nerves will take much more throttle - but I'll try!

Norman

Link to post
Share on other sites
  • 8 years later...

I had been reading this thread with interest, given that after the winter layup/improvement period (manifolds off to fit new ceramic coated exhaust manifold)I was getting exactly the same symptoms described by Norman. So having decided that an air leak was the most likely culprit, I first disconnected the OE PCV (newly refitted) and blanked the inlet manifold take off, the engine now idles quite happily! I'm guessing the PCV diaphragm is split, although not visually

As part of my investigation I also noticed that the lower LH clamp/nut only just clamped across the exhaust/inlet manifolds and the nut was only held by a few threads, not sure what's happening there

David

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.