Trumpy Posted November 3, 2023 Report Share Posted November 3, 2023 I’ve just replaced my nasty old leaky shock absorbers wirh Gaz adjustable units . The problem now is the adjuster screw is almost impossible to get at as it’s inside the lower spring housing plate. I’ve initially tightened the screw and turned it back 1 full turn ( no clicks either !). Anyone have any setting recommendations for these while I have the car in the air pls . Tr 5 road car . Quote Link to post Share on other sites
AJAS Posted November 3, 2023 Report Share Posted November 3, 2023 I fitted these to my 6. I can get to adjust them (just) using a long narrow blade screwdriver Quote Link to post Share on other sites
Trumpy Posted November 3, 2023 Author Report Share Posted November 3, 2023 Yeh , it looks like it’s just doable, I’ve cut a piece of the rubber mounting gasket away to get better access . I called Gaz who seemed v helpful, he suggested my initial setting may be too hard and suggested about half way so I’ve gone 3 turns from soft . Fingers crossed ! Quote Link to post Share on other sites
BlueTR3A-5EKT Posted November 3, 2023 Report Share Posted November 3, 2023 3 hours ago, AJAS said: I fitted these to my 6. I can get to adjust them (just) using a long narrow blade screwdriver +1 on TR3. Quote Link to post Share on other sites
Ian Vincent Posted November 3, 2023 Report Share Posted November 3, 2023 I have them set at halfway and they seem to work ok. Rgds Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.