Z320 Posted November 3, 2023 Report Share Posted November 3, 2023 I could explain, but I‘m better out Quote Link to post Share on other sites
RobH Posted November 3, 2023 Report Share Posted November 3, 2023 As the slave piston went all the way back when the pressure was relieved, it shows the problem is with the master cylinder or the flexi pipe to the slave. Unless this is fixed it will happen again. Check there is the correct clearance between the end of the clutch pedal lever and the master cylinder pushrod. If that us OK the fault may be the master cylinder itself. It is also possible for the flexi pipe to have collapsed internally and act as a partial valve. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.