Angus Bruce Posted September 20, 2023 Report Share Posted September 20, 2023 Pulled my cam today and it is marked stanpart 307689 and has a spiral oil channel. Is this a recent cam or the original from the 60’s? Quote Link to post Share on other sites
cp25616 Posted September 20, 2023 Report Share Posted September 20, 2023 Its the original 150BHP cam Angus. Should have 2 oilway rings at the other end, maybe another pic might be helpful showing the other end. Alan G Quote Link to post Share on other sites
Angus Bruce Posted September 20, 2023 Author Report Share Posted September 20, 2023 Can’t believe this thing has been going this long! Looks a bit tired so replacement is on the cards. Quote Link to post Share on other sites
John L Posted September 20, 2023 Report Share Posted September 20, 2023 The id rings should be on the front journal outside of the cam retaining plate, yours doesn't seem to have any markings. Chris Witor has a good chart, https://www.chriswitor.com/datasheets/camshaft_applications.pdf John Quote Link to post Share on other sites
Angus Bruce Posted September 21, 2023 Author Report Share Posted September 21, 2023 Thanks for the chart John. I found a 2 cast inbetween the lobes so early TR6 CP. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.