keith1948 Posted June 12, 2023 Report Share Posted June 12, 2023 At the weekend I acquired a bubble wheel balancer. I think it was an ex-garage item. It is an Easobal marked Booth patents 731459 from the 1960's. The parts on the stand with the bubble balancer I understand but what are the 5 strips of metal with the 4 holes in. The 2 sets of screws, one with a cup washer and bolt and the other just a screw with a flat end appear to screw into the part with 5 threaded holes in. The 2 smaller cones seem to be for different hub sizes. Any help on what these extra parts are for and how they attach etc welcome. It came with a tray of assorted imperial and metric weights and a gadget to remove weights. Keith Quote Link to post Share on other sites
stuart Posted June 12, 2023 Report Share Posted June 12, 2023 (edited) Probably for earlier Volkswagen beetle wheels that have the large hole in the middle. Stuart. Edited June 12, 2023 by stuart Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.