Graham Posted June 8, 2022 Report Share Posted June 8, 2022 Does anybody know of a source of the plate that is welded to the outside of the front inner wings that the bonnet hinges screw into ? Had A look at the Moss site and they don’t appear to be available separately from the inner wing panel Quote Link to post Share on other sites
RogerH Posted June 8, 2022 Report Share Posted June 8, 2022 Hi Graham I made myself some a couple of years ago. I'll have a look for the formers tomorrow. If I can find them then I'll be happy to make you a pair. Does anybody else need any whilst I'm at it. Roger Quote Link to post Share on other sites
Graham Posted June 8, 2022 Author Report Share Posted June 8, 2022 29 minutes ago, RogerH said: Hi Graham I made myself some a couple of years ago. I'll have a look for the formers tomorrow. If I can find them then I'll be happy to make you a pair. Does anybody else need any whilst I'm at it. Roger Roger that’s very kind let me know how much I owe you and I’ll get it in the post. ATB Graham Quote Link to post Share on other sites
stuart Posted June 8, 2022 Report Share Posted June 8, 2022 They arent available anywhere now AFIK so I do the same as Roger and make my own. Stuart. Quote Link to post Share on other sites
RogerH Posted June 11, 2022 Report Share Posted June 11, 2022 Hi Graham, have ordered some metal. When it arrives I'll start on your parts. Roger Quote Link to post Share on other sites
Graham Posted June 12, 2022 Author Report Share Posted June 12, 2022 On 6/11/2022 at 8:59 AM, RogerH said: Hi Graham, have ordered some metal. When it arrives I'll start on your parts. Roger Thanks Roger Quote Link to post Share on other sites
fabrice5925 Posted June 14, 2022 Report Share Posted June 14, 2022 Hi Roger I have to change I can't ask you to make for me but can you tell me how to make them? ( formers) do you have a photo? many thanks Fabrice Quote Link to post Share on other sites
RogerH Posted June 14, 2022 Report Share Posted June 14, 2022 Hi Fabrice, see my scrappy drawing below. The block is made from 'Delrin (black Nylon) 0.75" thick. The edge of the plate is turned over apprx 4mm. If you want me to make them then I will. Roger Quote Link to post Share on other sites
fabrice5925 Posted June 14, 2022 Report Share Posted June 14, 2022 Hi Roger many thanks for your help i think that is very diffucult for deliver part in france from UK in first time, i will use your drawing for make the part could you confirm me the delrin is similar at plastic the original is steel Fabrice Quote Link to post Share on other sites
RogerH Posted June 14, 2022 Report Share Posted June 14, 2022 (edited) Hi Fabrice, the Delrin is a Nylon type material. It needs to be hard. Hard wood may work - Oak etc The part is made of mild steel. appr 2mm thick. Roger Edited June 14, 2022 by RogerH Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.