iani Posted February 6, 2022 Report Share Posted February 6, 2022 If anyone is using a Nodiz unit, can you please share your map so I have a reasonable baseline. The car will be running a PH3 cam & DCOE's, will have final setup done on rolling road. Quote Link to post Share on other sites
stuart Posted February 7, 2022 Report Share Posted February 7, 2022 15 hours ago, iani said: If anyone is using a Nodiz unit, can you please share your map so I have a reasonable baseline. The car will be running a PH3 cam & DCOE's, will have final setup done on rolling road. Says its for 4 or 8 cylinder cars. Stuart. Quote Link to post Share on other sites
iani Posted February 7, 2022 Author Report Share Posted February 7, 2022 8 hours ago, stuart said: Says its for 4 or 8 cylinder cars. Stuart. It was originally Stuart and their website needs updating, the manual covers 6 cels and so does the software. Quote Link to post Share on other sites
FatJon Posted February 8, 2022 Report Share Posted February 8, 2022 This is the map on my PI 150hp, not a nodiz but may help. It idles at about 850RPM and 40kPa vacuum. The idle quality doesn't vary much with + or - 5 degrees but it does get hot without enough advance. My cam is standard 71 vintage so a bit warmer than later 125hp versions, and the car runs on 40mm throttle bodies so comparable maybe? Please wait while image is uploading... Quote Link to post Share on other sites
iani Posted February 9, 2022 Author Report Share Posted February 9, 2022 Thanks Jon, I will compare what you have sent with the default map on the Nodiz, it arrived yesterday so I can power it up at the weekend and take a look. Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.