stuart Posted September 24, 2021 Report Share Posted September 24, 2021 52 minutes ago, Adrian Pettitt said: Hi Stuart, yes I remember you said 3 but I only had 8 decent shims! Measuring for basic settings with below photo, I also have some turn plates for measuring rotation accurately for Castor/KPI. Seems to be pretty good but will obviously get full geometry checked when/if I get it close! Off to do some measurements on the NSF. thanks again Adrian Theyre not really that accurate I wouldnt have thought when mounted like that as you really need all four wheels on slip plates. Ive got shims if you need. Stuart. Quote Link to post Share on other sites
roy53 Posted September 24, 2021 Report Share Posted September 24, 2021 i would take measurements from the rims and not the tyres. Also tighten the wheel nuts. Roy Quote Link to post Share on other sites
Adrian Pettitt Posted September 24, 2021 Author Report Share Posted September 24, 2021 6 hours ago, roy53 said: i would take measurements from the rims and not the tyres. Also tighten the wheel nuts. Roy Thanks Roy, you can’t see it in the photo but the locating pins are on the rims. Just a couple of wheel nuts that are tight so I can whip the wheels off to play with the shims! cheers Adrian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.