DanTR6 Posted August 4, 2021 Report Share Posted August 4, 2021 What’s everyone’s thoughts on using conical seat wheel studs on hubs that don’t have a conical seat like the original? These Limora CV shafts say to use these studs, but surly that’s going to put a high point load into the root of the head and doesn't seem the best of ideas. The hub flange shows them like this in all the literature so its not something that's been missed during the machining process. Quote Link to post Share on other sites
tr graham Posted August 4, 2021 Report Share Posted August 4, 2021 Would not be using them myself. graham Quote Link to post Share on other sites
stuart Posted August 5, 2021 Report Share Posted August 5, 2021 I wouldnt, I would use these instead https://cambridgemotorsport.com/classic-historic/12564-tr2-6-1-2longer-wheel-stud.html Basically front hub studs so they have a flat head. Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.