Richardtr3a Posted March 8, 2021 Report Share Posted March 8, 2021 I needed new dust covers for the pushrods on the brake and clutch master cylinders on my 3A After some searching I found a supplier , BPC engineering , info@britishpipeclamps.co.uk . They were a reasonable price, stamped Girling and arrived after a few days. I need to know if there is a special grease which needs to be used when fitting on to the cylinder and to lubricate the the pushrod. I seem to remember that there was a special Girling grease. Does anyone have any recommendations ? Thanks Richard & B Quote Link to post Share on other sites
Hamish Posted March 8, 2021 Report Share Posted March 8, 2021 It’s a red grease isn’t it ? Quote Link to post Share on other sites
BlueTR3A-5EKT Posted March 8, 2021 Report Share Posted March 8, 2021 (edited) Girling Castrol red rubber grease. https://www.ebay.co.uk/itm/RED-RUBBER-GREASE-50-gram-CASTROL-FREE-POST-BRAKE-CYLINDERS-SEALS-O-RINGS/172358394738?hash=item28215c6372:g:kwgAAOxy2YtRrFLQ https://www.britishpipeclamps.co.uk/product/girling-master-cylinder-short-seal-dust-cover/ Edited March 8, 2021 by BlueTR3A-5EKT Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.