MartinWard Posted December 23, 2020 Report Share Posted December 23, 2020 I need to replace the existing bitumen based liner in the wheel well, any advice on suitable products Quote Link to post Share on other sites
Kevo_6 Posted December 23, 2020 Report Share Posted December 23, 2020 Hi Martin I used this company:- http://www.ebaystores.co.uk/WAYSIDE-ADHESIVES-DIRECT car and van sound deadening pads. I used them for the inside of my doors as the original pad had crumbled off. I found them very good. No connection, just worked for me. Quote Link to post Share on other sites
stuart Posted December 23, 2020 Report Share Posted December 23, 2020 33 minutes ago, Kevo_6 said: Hi Martin I used this company:- http://www.ebaystores.co.uk/WAYSIDE-ADHESIVES-DIRECT car and van sound deadening pads. I used them for the inside of my doors as the original pad had crumbled off. I found them very good. No connection, just worked for me. They are the ones I use too, warm them up with a hot air gun then they will conform to any swages in the floors etc a lot better. Stuart, Quote Link to post Share on other sites
roy53 Posted December 23, 2020 Report Share Posted December 23, 2020 (edited) A heat resistant pad would be good as we all know we don't want to be heating up the fuel tank area in a PI car. Being that our exhaust boxes run tight to the floor. Roy Edited December 24, 2020 by roy53 more info Quote Link to post Share on other sites
MartinWard Posted December 24, 2020 Author Report Share Posted December 24, 2020 Thanks for your replies, certainly don’t want any more fires in the car - article in TRAction refers! Having the whole car painted now, thats what prompted a review of various areas in need of a bit of TLC. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.