rvwp Posted December 9, 2020 Report Share Posted December 9, 2020 Hi Guys, What's the recommended grease (if any), that should be applied to the clutch bearing carrier/clutch bearing before assembling the gearbox to the engine? Thanks Rich Quote Link to post Share on other sites
jerrytr5 Posted December 9, 2020 Report Share Posted December 9, 2020 Coppaslip. At the risk of starting up a long discussion, presume you've done the usual cross shaft upgrades? Jerry Quote Link to post Share on other sites
rvwp Posted December 9, 2020 Author Report Share Posted December 9, 2020 Oh yes, new shaft and pin and extra bolt through cross shaft . Just wondering what grease to use on bearing carrier, if any? Quote Link to post Share on other sites
RogerH Posted December 9, 2020 Report Share Posted December 9, 2020 Hi Rich a small amount of any general purpose grease. LM. Moly etc. The Red grease in brake rebuild kits can be used on the clutch disc splines. Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.