InfinityJon Posted November 21, 2020 Report Share Posted November 21, 2020 Could someone do me a favour and measure the length of the runners on the inlet manifold please. I need the length from the face of the flange where it meets the inlet on the block to the face where it meets the Weber. cheers Jonathan Quote Link to post Share on other sites
unclepete Posted November 21, 2020 Report Share Posted November 21, 2020 110mm Quote Link to post Share on other sites
InfinityJon Posted November 21, 2020 Author Report Share Posted November 21, 2020 Thank you sir Quote Link to post Share on other sites
InfinityJon Posted November 22, 2020 Author Report Share Posted November 22, 2020 Sorry,one more measurement. what pitch are the three carbs on? Ie the distance from the centre of the top cap wing nut to the Center of the next top cap wing nut? cheers Quote Link to post Share on other sites
unclepete Posted November 30, 2020 Report Share Posted November 30, 2020 180mm Quote Link to post Share on other sites
InfinityJon Posted December 1, 2020 Author Report Share Posted December 1, 2020 Thanks Pete. That’s what I was hoping. im trying to look at the cost of machining my own inlets from billet Ali. And would they be less than the £450 to £850 for current cast ones? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.