Mike JOnes Posted November 11, 2020 Report Share Posted November 11, 2020 Does anyone know where I can obtain the rear gearbox mounting to connect my Toyota W58 gearbox to the TR250 chassis? Thanks for any input Mike Quote Link to post Share on other sites
Andy303 Posted November 11, 2020 Report Share Posted November 11, 2020 (edited) Mike: I have extracted several pages from the HVDA kit instructions that might help. The TR250 would mount the same as my TR4A as shown. Brackets 540 and 550 bolt to the tail of the W58, brackets 560 and 570 bolt to the frame in the same place as the original rear mount cross member. Also attached are the sheet with the Moss part numbers for the kit. You might be able to finagle the bits from them. Otherwise you may have to fabricate. There is another guy over here who makes a conversion kit. His flyer is attached. Perhaps he wold sell just the rear mounts. The flyer shows one for the later TR6. Edited November 11, 2020 by Andy303 Quote Link to post Share on other sites
Mike JOnes Posted November 11, 2020 Author Report Share Posted November 11, 2020 Thanks Andy...I spoke to Moss Uk who cant help but they also referred me to the Moss USA and the HDVA kit. I have not yet followed it up though. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.