mark_smugglers Posted May 31, 2020 Report Share Posted May 31, 2020 Hi When my car was at the Bodyshop, the painter inadvertently filled in the two mounting holes for the rear triumph badge. Can anyone provide measurements please, so I can re- drill them. Happy to take measurements either for the holes (if anyone has one with the badge already off) or for the badge. From looking at photos it looks like the left hand side of the badge lines up with the red light lens, and vertically it’s half way between the light and the boot lid but I’d prefer to check. Thanks Mark Quote Link to post Share on other sites
SteveB21 Posted May 31, 2020 Report Share Posted May 31, 2020 Hi Mark Hopefully these pictures help. The top of the badge is about 17mm below the boot lip and it is about 4mm to the right of the red lens line - on my car anyway! Cheers Steve Quote Link to post Share on other sites
mark_smugglers Posted June 4, 2020 Author Report Share Posted June 4, 2020 Thanks both. Hugely appreciated. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.