John McCormack Posted September 26, 2019 Report Share Posted September 26, 2019 I'm on a roll tonight. Can anybody tell me how these bands clips are tied? The diagram on the Rimmer site is inconclusive and when I tried it the band was secure. Rimmer - Clip - Aluminium Band Type - Part No. AHH 7108 Quote Link to post Share on other sites
BlueTR3A-5EKT Posted September 26, 2019 Report Share Posted September 26, 2019 John, Are you trying to clip the thermometer capillary tube to the fuel pipe on a TR2-3B? If so I found these to be a load more secure than the aluminium cleats - 138892 - is the metal clip for the carb vacuum hose to the fuel pipe on a Midget/Spitfire 1500 https://www.moss-europe.co.uk/clip-tube-to-fuel-pipe-138892.html?assoc=419994 item 151 in this picture https://www.moss-europe.co.uk/shop-by-model/mg/midget/fuel-system-induction-controls/tanks-pumps-pipes-fittings/fuel-tank-pipes-pump-sprite-iv-midget-iii-1500-1967-79.html View of them used on my car. Cheers Peter W Quote Link to post Share on other sites
john.r.davies Posted September 26, 2019 Report Share Posted September 26, 2019 Special pliers: An old type wire cutter pliers - not 'side cutting' - would do it. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.