Long Door Posted June 19, 2019 Report Share Posted June 19, 2019 Just about to replace my TR2 heater valve and extension pipe .I need advice on thread sealant please Keith Quote Link to post Share on other sites
stuart Posted June 19, 2019 Report Share Posted June 19, 2019 I use this sort of stuff https://www.ebay.co.uk/itm/Force-80g-Brake-Pipe-Air-line-sealant-Liquid-PTFE-Sealer-Instant-Seal/201957613019?epid=1748164042&hash=item2f059c9ddb:g:0akAAOSwyltZRPn~&frcectupt=true Stuart. Quote Link to post Share on other sites
Long Door Posted June 19, 2019 Author Report Share Posted June 19, 2019 Hi Stuart, Thanks for the advice,as the Force product is PTFE would plumbers PTFE tape be OK ,as I already have some in my tool box ? Keith Quote Link to post Share on other sites
stuart Posted June 20, 2019 Report Share Posted June 20, 2019 Yes it would do the same thing. Stuart. Quote Link to post Share on other sites
ijonsson Posted June 20, 2019 Report Share Posted June 20, 2019 I would go for the liquid sealant, so much better than tape, and it has a bit of thread locking effect as well. Quote Link to post Share on other sites
Long Door Posted June 20, 2019 Author Report Share Posted June 20, 2019 Thank you for the advice I will try the tape first, the tap thread is tapered so should lock ok Keith Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.