Jim F Posted April 22, 2006 Report Share Posted April 22, 2006 What would be the right make of UJ's to fit to an early TR6's drive and prop shafts? Thanks Jim Quote Link to post Share on other sites
jean Posted April 22, 2006 Report Share Posted April 22, 2006 Jim, welcome to the forum. Best check with Revingtontr, they sell uprated UJ's with larger rollers. On my car I have UJ's from ZKG # KR 1.730.000 The rollers are 2.35mm diameter against 1.8mm for standard. In addition the are fitted with 2 grease nipples. Don't know if they are the same Revington sells. jean Quote Link to post Share on other sites
Richard Crawley Posted April 22, 2006 Report Share Posted April 22, 2006 By all means go for the uprated UJ's jean suggests but at least make sure you get units with grease nipples fitted. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.