roy53 Posted April 15, 2019 Report Share Posted April 15, 2019 I require a pair of front over riders with support bars. A metal glove box lid for a LH drive dash. Also how does the choke cable fit carb end on stromberg carbs set up. if only i had taken photo's ROY Quote Link to post Share on other sites
signalredshaker Posted April 15, 2019 Report Share Posted April 15, 2019 These pictures should be of some help. Cable enters boss and there the outer cable ends- inner cable continues to square shaped projection on carburettor casting (the one with small hole) - cable then held tight by screw through the latter projection. Make sure carb moving bits are well lubricated and free of any drag. Good luck! Quote Link to post Share on other sites
rcreweread Posted April 15, 2019 Report Share Posted April 15, 2019 Roy - I sent you emails with photos of the stays and over riders - I haven't had a response so did you not get them? Cheers Rich Quote Link to post Share on other sites
roy53 Posted April 23, 2019 Author Report Share Posted April 23, 2019 On 4/15/2019 at 7:53 PM, rcreweread said: Roy - I sent you emails with photos of the stays and over riders - I haven't had a response so did you not get them? Cheers Rich No not received yet Rich Quote Link to post Share on other sites
rcreweread Posted April 23, 2019 Report Share Posted April 23, 2019 Can you PM me your email to confirm I got it correct Cheers Rich Quote Link to post Share on other sites
roy53 Posted April 24, 2019 Author Report Share Posted April 24, 2019 On 4/15/2019 at 6:54 PM, signalredshaker said: These pictures should be of some help. Cable enters boss and there the outer cable ends- inner cable continues to square shaped projection on carburettor casting (the one with small hole) - cable then held tight by screw through the latter projection. Make sure carb moving bits are well lubricated and free of any drag. Good luck! many thanks for the photos , now sorted Roy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.