Robert Price Posted March 5, 2019 Report Share Posted March 5, 2019 (edited) I wanted to replace my speedo cable so I have cut 2 holes close together in the side of the fibreglass tunnel and managed to undo the cable, but the angle drive is loose. Now before I cut anymore off the tunnel am I right in thinking there is a threaded collar similar to the speedo cable which attaches the drive to the gearbox? I have not seen one out of a car so would like to be sure before any more hole cutting, although it does look a neat and easy way to get access. Rob Edited March 5, 2019 by Robert Price Quote Link to post Share on other sites
Waldi Posted March 5, 2019 Report Share Posted March 5, 2019 Yes, there is a large round nut, a little ribbled, that you can tighten up. Waldi Quote Link to post Share on other sites
Robert Price Posted March 5, 2019 Author Report Share Posted March 5, 2019 Thank you Waldi just the confirmation I wanted. Rob Quote Link to post Share on other sites
John L Posted March 5, 2019 Report Share Posted March 5, 2019 So useful info here and pictures Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.