Steven Polden Posted November 15, 2018 Report Share Posted November 15, 2018 H, does anyone have a photo of the front wing, bulkhead sealer and plate in situ they could share, mine had rusted away and I want to make sure I'm fitting it correctly. It seems as though I need to bend the plate to fit to the bulkhead and then trim the rubber to fit nicely around the profile of the wing? I've only got the parts catalogue as a reference and the holes in the seals don't appear to totally align with the holes I have in the panel Thanks Quote Link to post Share on other sites
Lebro Posted November 15, 2018 Report Share Posted November 15, 2018 Yes, you do have to bend the plate rearwards at the top, the holes should line up. Bob. Quote Link to post Share on other sites
ijonsson Posted November 15, 2018 Report Share Posted November 15, 2018 (edited) This is how I did it, there is a supporting plate behind the rubber with about the same shape. Edited November 15, 2018 by ijonsson Quote Link to post Share on other sites
Steven Polden Posted November 16, 2018 Author Report Share Posted November 16, 2018 Thanks very much Quote Link to post Share on other sites
Fireman049 Posted November 17, 2018 Report Share Posted November 17, 2018 (edited) . Edited April 16, 2020 by Fireman049 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.