d2alfa Posted April 7, 2018 Report Share Posted April 7, 2018 Hi, I have taken my engine out for a rebuild and notice that the fitted rectangular engine mounting blocks include off-set threaded bars. As fitted the blocks have their long side vertical but the bars facing the engine are nearer the bottom on one side and nearer the top on the other side. It is probably better to get the blocks in their correct position before offering up the engine even if not fully tightened. Should the blocks actually be mounted with their long side vertical or horizontal? What should be the position of the threaded bars, nearer the top or nearer the front depending on the answer to the previous question? Thanks D2 Quote Link to post Share on other sites
peejay4A Posted April 7, 2018 Report Share Posted April 7, 2018 (edited) I cant help with the orientation but I would suggest replacing the rectangular ones with circular Land Rover ones. I and a number of others on here have done that. They are a bit less compliant than the rectangular ones. Edited April 7, 2018 by peejay4A Quote Link to post Share on other sites
Lebro Posted April 7, 2018 Report Share Posted April 7, 2018 Long side vertical Quote Link to post Share on other sites
d2alfa Posted April 8, 2018 Author Report Share Posted April 8, 2018 Thanks for the replies d2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.