len1 Posted September 14, 2017 Report Share Posted September 14, 2017 so i have been putting my front suspension back together but i have ended up as per my photos when i took it apart but it doesnt seem right to me. The ball joints are in different positions and the wishbone top arms are not the same on both sides. hopefully the pictures will explain .......where has it gone wrong ? len Quote Link to post Share on other sites
RogerH Posted September 14, 2017 Report Share Posted September 14, 2017 (edited) Hi Len, the ball joint needs to be rear of the centreline so you need to swap the arms around on the right hand side - I think. I thought the arms had the positions stamped on them. Roger PS - the upper front on both sides has the deeper curve to it. Roger Edited September 14, 2017 by RogerH Quote Link to post Share on other sites
len1 Posted September 14, 2017 Author Report Share Posted September 14, 2017 Thanks Roger the wrong had to be the built up one ...didnt it ! len Quote Link to post Share on other sites
len1 Posted September 14, 2017 Author Report Share Posted September 14, 2017 Roger thanks for your quick reply , its all sorted now.....my photos kind of showed it as i had it but i couldnt see it was right. trouble is with photos they are always slightly different angles to what you want ! cheers Len Quote Link to post Share on other sites
Drewmotty Posted September 14, 2017 Report Share Posted September 14, 2017 Better check that the trunnions are on the correct sides too. Quote Link to post Share on other sites
len1 Posted September 14, 2017 Author Report Share Posted September 14, 2017 Yes L is on the left ....R is on the right. Cheers Len Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.