AndrewMAshton Posted September 5, 2017 Report Share Posted September 5, 2017 Hello All, after having read a few comments (mostly adverse) about the seals presently available, does anyone know if the Rimmer door seals fit and is it straightforward or does it require fettling, as always, thanks, Andrew Quote Link to post Share on other sites
stuart Posted September 8, 2017 Report Share Posted September 8, 2017 I use these that fit well, plain rubber covered but dont look out of place and easier to keep clean. http://www.woolies-trim.co.uk/p-1285-door-seal.aspx Stuart. Quote Link to post Share on other sites
Mark69 Posted September 10, 2017 Report Share Posted September 10, 2017 (edited) Stuart do you use woolies for all your seal applications, I need to replace all mine,doors boot and bonnet. If you don't who do you recommend. Thanks in advance Mark. Edited September 10, 2017 by Mark69 Quote Link to post Share on other sites
stuart Posted September 11, 2017 Report Share Posted September 11, 2017 Stuart do you use woolies for all your seal applications, I need to replace all mine,doors boot and bonnet. If you don't who do you recommend. Thanks in advance Mark. Yes I do with the exception of Surrey lower seal which I buy from Seals Direct. Best boot seal for 4/4a/5/6 is this one http://www.woolies-trim.co.uk/p-1928-small-boot-seal.aspx Stuart. Quote Link to post Share on other sites
PYU940F Posted September 11, 2017 Report Share Posted September 11, 2017 Stuart, Thanks for the tip about the Woolies boot seal. Have never found one to fit properly, all too bulky causing lid to sit proud and put pressure on boot hinges Last 20 years driving without one but will get the Woolies one. Simon Quote Link to post Share on other sites
Mark69 Posted September 12, 2017 Report Share Posted September 12, 2017 Cheers Stuart. Mark Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.