rog1 Posted October 6, 2016 Report Share Posted October 6, 2016 Hi, Just stripped my suspension down and the rear lower wishbone is definitely oval, just wondered if the front one is ok to use or not as it is only slight compared to the rear? Also attached a pic of the upper arms, are they supposed to look like this? Can't find a pic anywhere showing this difference in the bush holes. What are the options/recommendations for replacements? Regards Quote Link to post Share on other sites
Richard71 Posted October 6, 2016 Report Share Posted October 6, 2016 Hi Roger, I trial fitted a bush and inner stainless steel sleeve to one of my ovaled arms, the sleeve had excessive play, more or less rattling around inside the bush so I scrapped it and sourced good 2nd hand arms from Revington TR. Not too sure what you're referring to with the upper arms??? Quote Link to post Share on other sites
rog1 Posted October 6, 2016 Author Report Share Posted October 6, 2016 Thanks Richard. Apologies if it isn't clear what I meant about the upper arms. The one on the left in the pic is offset to the arm, whereas the one on the right is central, the gap around it to the arm is the same all the way round unlike the other? Quote Link to post Share on other sites
Richard71 Posted October 6, 2016 Report Share Posted October 6, 2016 Ahh, I see what you mean, I don't have mine on the bench to make a comparison, must assume it's meant to be like that. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.