TR NIALL Posted October 5, 2016 Report Share Posted October 5, 2016 Can anyone give me the Toe In/Out Figures in Degrees rather than "inchs as myself or the Operator did not know how to do the Conversion Figures,Cheers. Quote Link to post Share on other sites
tim hunt Posted October 5, 2016 Report Share Posted October 5, 2016 I don't know the figure for the TR6 Niall but for the 4A the workshop manual calls for a total toe-in (front and rear for IRS cars) of 0" to 1/16" (1.6mm). In Hunter Speak this converts by simple geometry to 0 to 8 minutes total toe in. Regards, Tim Quote Link to post Share on other sites
TR NIALL Posted October 6, 2016 Author Report Share Posted October 6, 2016 (edited) Thanks for the Reply Tim, the TR6 is 0 to.062 so that's = to 1.575mm so anyone know what's that in Hunter Talk,Cheers. So is it 0 to 8 Mins Total Toe In? Edited October 6, 2016 by TR NIALL Quote Link to post Share on other sites
ptjs1 Posted October 6, 2016 Report Share Posted October 6, 2016 Niall, Is this of any help? https://robrobinette.com/ConvertToeInchesToDegrees.htm Cheers Paul Quote Link to post Share on other sites
TR NIALL Posted October 6, 2016 Author Report Share Posted October 6, 2016 Niall, Is this of any help? https://robrobinette.com/ConvertToeInchesToDegrees.htm Cheers Paul Thanks Paul,something else for me to play with. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.