Ian Barker Posted September 1, 2016 Report Share Posted September 1, 2016 Hi All, first post here by first-time TR6 owner in Spain. (LHD 1972 CP, assembled in Belgium.) I've been hard at work exterminating the various electrical gremlins inherited with the car, to which end a new hazard light switch is now on order. But is there any way to fit this without dismantling the entire dashboard? It's sandwiched between the speedo and the tachometer, and I can't make out how it's fixed. It doesn't look like it just pushes out, like the washer and wiper switches. Thanks in advance for any advice! Quote Link to post Share on other sites
peejay4A Posted September 1, 2016 Report Share Posted September 1, 2016 It's easy to take out the speedo and tacho. Then you'll have much more space to work. Quote Link to post Share on other sites
elclem1 Posted September 2, 2016 Report Share Posted September 2, 2016 I think that plate is fixed from the rear, two little screws. Quote Link to post Share on other sites
pkurzok Posted November 29, 2016 Report Share Posted November 29, 2016 hi ian there are two little screws the backing plate in but be careful there is a 4 wire switch and a 6 terminal switch I am trying to buy a 4 wire at present with out luck I am also in spain (benidorm) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.