Red 6 Posted June 15, 2016 Report Share Posted June 15, 2016 My 3a restoration is chugging along nicely and I am thinking about speeding up a few sections by locating a nice boot lid and re skinning the doors. Has anyone bought seen or fitted the boot lids available from Moss or rimmers? Do they fit and is the profile correct. Same with the door skins. If I could find good ready to fit used items I would but there is nothing around and I cannot wait until the international where there will be loads. Quote Link to post Share on other sites
Stevecross Posted June 16, 2016 Report Share Posted June 16, 2016 Red You have a PM Steve Quote Link to post Share on other sites
stuart Posted June 16, 2016 Report Share Posted June 16, 2016 All boot lids regardless of new or S/hand will need fettling to fit the hole regardless and be aware with the door skins the main swage isnt very well formed so does need work also. Stuart. Quote Link to post Share on other sites
mjdearing Posted June 16, 2016 Report Share Posted June 16, 2016 Hi i have a NOS Stanpart boot i would let it go for same as Moss price ? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.