NDRAC04 Posted April 4, 2016 Report Share Posted April 4, 2016 Just in the process of fitting the plastic moldings and heater pipes for the windscreen vents after the LHD to RHD conversion. I now find I can't fit the new glove box as it fouls the vent fitting. I was surprised to find both moldings are the same on my car,with the outlets both pointing to the near side of the car - looking at some exploded views it seems I need the pipes to point to the centre of the car. I suppose on the LHD, this didn't present an issue as the passenger side was correct, but now it's RHD, it's incorrect. Anyone else come, across this? Also, it's a long shot I know, but does anyone have a correct molding for the passenger side they can sell me? Quote Link to post Share on other sites
TR4A1965 Posted April 4, 2016 Report Share Posted April 4, 2016 I saw some at Walter Petchy's place. Best Paul. http://tr4a.weebly.com/walter-petchy.html Quote Link to post Share on other sites
Bob Smith Posted April 4, 2016 Report Share Posted April 4, 2016 I have several demist ducts spare for both LH & RH sides if you are not yet sorted. PM me if still stuck. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.