Chris59 Posted January 26, 2016 Report Share Posted January 26, 2016 Hello guys, I need to rebuilt a 1949 Triumph 2000 Roadster water pump, so would like to find new seals, bearings, clips, ..... The pump internals may be similar to a Tr2, 3 or 4 pump, but I'm not sure of this. Do you know where I could find these parts, thanks ? Quote Link to post Share on other sites
Ian Vincent Posted January 26, 2016 Report Share Posted January 26, 2016 (edited) Chris I bought a new seal for a TR3a pump from a Ferguson Tractor Spares site it cost about £7. I'll see if I can find the site and add a link to this posting. (see below) The bearings came from a standard bearing supplier but were a slightly different ID and I got a friend of mine with a lathe to run me up a stainless steel shaft to fit - I got the idea from Don Elliott and he provided me with a sketch with the dimensions. Rgds Ian http://www.vintagetractorspares.co.uk/vintage_tractor_parts/parts/t20.pdf Edited January 26, 2016 by Ian Vincent Quote Link to post Share on other sites
mjdearing Posted January 27, 2016 Report Share Posted January 27, 2016 Hello mate i use Agriline for all my tractor spares so if you know the part fits the TR it usually works out less than half the price than from TR specialists here's the seal http://www.agrilineproducts.com/Catalogue/Navigate/ferguson-te20 Quote Link to post Share on other sites
Chris59 Posted January 27, 2016 Author Report Share Posted January 27, 2016 Hello guys, Thanks for the links, they should solve my problem Quote Link to post Share on other sites
Chris59 Posted January 28, 2016 Author Report Share Posted January 28, 2016 Hello, I've place an order from both suppliers, and will compare the quality of the seals. Thanks again for your help guys ! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.