jwykes Posted September 20, 2015 Report Share Posted September 20, 2015 (edited) I've been busy fabricating a roll over frame for several weeks, to reach all those hard to find places on the body. I have impressed myself as I finished it today. The frame when attached can be easily rotated by pushing and holds the body secure. It will be useful to transport when its ready for painting Just back to underseal scraping and more welding. Have a look and see what you think. Its been done before I know but my frame is lighter Edited September 20, 2015 by jwykes Quote Link to post Share on other sites
Dave I O W Posted September 20, 2015 Report Share Posted September 20, 2015 Looks very good well done, Cheers Dave. Quote Link to post Share on other sites
John Morrison Posted September 20, 2015 Report Share Posted September 20, 2015 Doyou have a name? what size of steel did you use? John, Quote Link to post Share on other sites
jwykes Posted September 21, 2015 Author Report Share Posted September 21, 2015 John Yes i'm James I used 20x40mm box section for the hoops and 2x25mm for the cross braces which bolt to the body. Need to improve the castor to frame securing method as I ran out of material. Alex Falize was the source of this design, but I thought it was a little on the heavy side and the braces were not removable from the frame. hope that helps James Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.