Rktr4a Posted September 9, 2015 Report Share Posted September 9, 2015 Hi all, Can anyone advise me regarding fitting new lamp housings.According to Roger Willams restoration manual they should be fitted inside the inner wing. My cars ones were fitted outside and I believe that was original from the factory. Can anyone advise .The reason I need to know is that I'm trying to new rear inner wing rear deck and the two panels at the front and rear of the rear deck and want everything to line up with new outer wing when offered up.Do all these parts "hook " over inner wing or are they fitted to the inner lip...? Any advice welcome and maybe photos of this area. Cheers Rob Quote Link to post Share on other sites
Mark (tenpin) Posted September 16, 2015 Report Share Posted September 16, 2015 Hi Rob didn't know if you had a response by PM hope these pictures help the pockets are welded to the offset plate and they sit on the inside Mark Quote Link to post Share on other sites
graeme Posted September 17, 2015 Report Share Posted September 17, 2015 Hi Rob, This is a photo of an original unmolested shell. Hope it confirms what you need. Cheers Graeme Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.