Guest ntc Posted February 12, 2015 Report Share Posted February 12, 2015 John Quote Link to post Share on other sites
JohnG Posted February 12, 2015 Author Report Share Posted February 12, 2015 Thanks Neil I'll try not to lose this one John Quote Link to post Share on other sites
Peter Cobbold Posted February 12, 2015 Report Share Posted February 12, 2015 Thanks Neil I have specific pieces of timber for specific jobs already, so, I will add a couple more to the stock I also plan to make some low adjustable (3" - 5" high) timber ramps so that I can quickly raise one end of the car safely, without having to jack, when I need to get to the 'almost accessible' places. I plan to use 180mm wide x 1" thick timber planking, which can stack, held together using steel dowels I have a small, single car garage and need kit I can use that is flexible John Just noticed the mix of metric and imperial . . . .do it all the time in my head! Timber ramps with removable run-up: http://www.gtr.co.uk/forum/158521-new-car-ramps.html Peter Quote Link to post Share on other sites
JohnG Posted February 12, 2015 Author Report Share Posted February 12, 2015 Peter Almost what I have in production Mine are made from decking planks and are 245mm wide for safety They are 4 high, made as 2 pieces, each of 2 layers of planking, so that I have the option of 'low' or 'high' The 2 'halves' will be joined with separate steel dowels, again, for safety This gives me flexibility and ease of storage, under the car I will put some pictures up, when they are complete John Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.