flyer295 Posted April 24, 2014 Report Share Posted April 24, 2014 The wheel arch covers, are they loose fitting or do they have hardboard lining. How are they fixed to the actual arch. Bob Quote Link to post Share on other sites
Jersey Royal Posted April 24, 2014 Report Share Posted April 24, 2014 Bob, See here, http://www.victoriabritish.com/interiors/t6/ Cheers Guy Quote Link to post Share on other sites
flyer295 Posted April 24, 2014 Author Report Share Posted April 24, 2014 Thanks Quote Link to post Share on other sites
BlueTR3A-5EKT Posted April 24, 2014 Report Share Posted April 24, 2014 Bob, See here, http://www.victoriabritish.com/interiors/t6/ Cheers Guy Well found Guy That is a good 'blow by blow' description of a TR retrim. Cheers Peter W Quote Link to post Share on other sites
Guest ntc Posted April 24, 2014 Report Share Posted April 24, 2014 I would not fit them as described in the above,good luck if you do Quote Link to post Share on other sites
BlueTR3A-5EKT Posted April 24, 2014 Report Share Posted April 24, 2014 Come on Neil it is American...... Quote Link to post Share on other sites
Guest ntc Posted April 24, 2014 Report Share Posted April 24, 2014 Not used to the raised piping Peter Quote Link to post Share on other sites
peejay4A Posted April 26, 2014 Report Share Posted April 26, 2014 (edited) I followed some internet instructions that I was pointed at by the forum on my 4A interior (with piping). I can't find the link but I recall that I left a gap in the foam around the wheel arch where the piping would run, then this was the first bit to be glued which allowed the material to be gently stretched into place with no ripples. Edited April 26, 2014 by peejay4A Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.