alfietom Posted September 23, 2012 Report Share Posted September 23, 2012 Looking to convert my original sealed beam lights to a halogen conversion. The ads give me 2 choices, either standard or 'Pilot' - Which do I need for a TR4a and what do they mean by Pilot? Thanks Simon Quote Link to post Share on other sites
NickKerfoot Posted September 23, 2012 Report Share Posted September 23, 2012 Hi Simon! Headlamps with a "Pilot" lamp have a separate small bulb which can be wired into the side lamp circuit or via a relay to operate only when ignition AND side lamps are selected as per a modern set up. Either sort should fit your headlamp bowls - just depends if you want to do the required alterations!!! Regards Nick Quote Link to post Share on other sites
RogerH Posted September 23, 2012 Report Share Posted September 23, 2012 Go for standard. Roger Quote Link to post Share on other sites
alfietom Posted September 23, 2012 Author Report Share Posted September 23, 2012 Thought so Nick and yes Roger, I'll go for standard. Thanks again Simon Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.